Mapei Ultrabond Eco S9551K 15kg Tub
One-component, solventfree, sililated polymerbased adhesive with a very low emission level of volatile organic compounds
Bonding wooden parquet and all types and formats of pre-finished materials.Spread the adhesive on the substrate using a MAPEI notched trowel for wood. Wood to be laid within approximately 50-60 minutes under normal temperature conditions (at +23°C and 50% R.H.). If leftover adhesive from previous applications is to be used, open the drum, remove the skin formed on the surface of the adhesive and proceed as above. The layer of skin helps to preserve the left-over adhesive.
Estimated Delivery: 3 - 5 Working Days
Ultrabond Eco S955 1K is a one-component, sililated polymer-based adhesive without water, solvents, with a very low emission level of volatile organic compounds (EMICODE EC1 R Plus). It is manufactured according to a technology developed in MAPEI’s own research laboratories and has the following characteristics: one-component, ready-to-use product; no catalyser is required, therefore no mixing. If stored correctly, remaining quantities of the product may be used again at a later date; suitable for use by installers who are allergic to epoxy and epoxy-polyurethane products; GEV certified, as a product with a very low emission level of volatile organic compounds (EMICODE EC1 R Plus); compatible with Ultracoat and Ultracoat Oil water based varnishes and undercoats; no hazard risks and risk and danger symbols; easy to apply with excellent ridge holding; 20-30% more yield compared with conventional
Two-component adhesives, thanks to its low viscosity and free-flowing properties when applied by trowel; totally free of solvents; easy to remove from hands and pre-finished elements.
Before installation starts, doors and windows should be installed.
The humidity level in the screed must be compliant with that prescribed by the current standards for the installation of wood, and as indicated in the technical data sheet for the parquet.If the substrate is not thoroughly dried, or if the residual humidity is higher than the level prescribed, we recommend the use of a suitable waterproofing primer, such as Eco Prim PU 1K, Primer MF, etc. If there is a risk of rising damp, a vapour barrier must be installed before laying the screed. Do not use Ultrabond Eco S955 1K if the temperature is lower than +10°C or higher than +35°C. • When transported over long distances, thermally insulated containers may be required. Preparation of the substrate The substrate must be checked carefully to assess its condition, and to prepare it for laying parquet.
Delivery charges to the UK vary by product and delivery area. Add products to your cart to calculate shipping costs. Estimated delivery times can be found beneath the price on each product page.
International orders are welcome. Please create an account and follow the instructions on the delivery page to request a quote.
Write Your Own Review